Removal Procedure

WARNING: Refer to GASOLINE/GASOLINE VAPORS CAUTION .

Fig 1: Identifying Fuel Line And Retainer

Courtesy of SUZUKI OF AMERICA CORP.

Relieve the fuel system pressure. Refer to the FUEL PRESSURE RELIEF (WITH J 34730-1A) or FUEL PRESSURE RELIEF (WITHOUT J 34730-1A) .
Remove the fuel feed line quick connect fitting retainer.

Fig 2: Blowing Dirt Out Of Fitting
Courtesy of SUZUKI OF AMERICA CORP.

WARNING: Refer to SAFETY GLASSES CAUTION .

CAUTION: Refer to FUEL AND EVAPORATIVE EMISSION HOSE/PIPE CONNECTION CLEANING NOTICE .
Blow dirt out of the fitting using compressed air.

Fig 3: Identifying Special Tool J 37088-A

Courtesy of SUZUKI OF AMERICA CORP.

Choose the correct tool from the J 37088-A for the size of the fitting. Insert the tool into the female connector, then push inward in order to release the locking tabs.

Fig 4: Identifying Special Tool J 37088-A
Courtesy of SUZUKI OF AMERICA CORP.

WARNING: Refer to RELIEVING FUEL PRESSURE CAUTION .
Pull the connection apart.
Use a clean shop towel in order to wipe off the male pipe end.
Inspect both ends of the fitting for dirt and burrs. Clean or replace the components as required.