Installation Procedure

Fig 1: Identifying Latch Release Strap And Floor Latches

Courtesy of SUZUKI OF AMERICA CORP.

Install the rear seat to the vehicle, locating the seat over the studs on the floor.
Secure the rear of the seat by pushing down on the back of the seat ensuring that the seat latch (2) is securely latched.

Fig 2: Identifying Nuts
Courtesy of SUZUKI OF AMERICA CORP.
Install the 6 attachments nuts (1) to the front and side risers of the seat.
Tightening torque

Tighten the bolts to 40 N.m (30 lb ft) .
Remove the bolt (1) after that seat is securely in place.

Fig 3: Identifying Bolt
Courtesy of SUZUKI OF AMERICA CORP.
Return the rear seat to its original position.