Tightening Torque Specifications
TIGHTENING TORQUE SPECIFICATIONS
| Fastening part | Tightening torque | ||
|---|---|---|---|
| N.m | kgf-m | lb-ft | |
| Transaxle oil level / filler plug | 21 | 2.1 | 15.5 |
| Transaxle oil drain plug | 21 | 2.1 | 15.5 |
| Back up light switch | 23 | 2.3 | 17.0 |
| Guide case bolt No. 1 | 23 | 2.3 | 17.0 |
| Guide case bolt No. 2 | 23 | 2.3 | 17.0 |
| Gear shift interlock bolt | 23 | 2.3 | 17.0 |
| 5th to reverse interlock guide bolt | 23 | 2.3 | 17.0 |
| Countershaft nut | 100 | 10.0 | 75.0 |
| Shift fork shaft bolt | 10 | 1.0 | 7.5 |
| Side cover bolt | 10 | 1.0 | 7.5 |
| Reverse gear shift lever bolt | 23 | 2.3 | 17.0 |
| Transaxle case bolt | 23 | 2.3 | 17.0 |
| Reverse shaft bolt | 21 | 21 | 15.5 |
| Gear shift locating bolt | 13 | 1.3 | 9.5 |
| Left case plate bolt | 23 | 2.3 | 17.0 |
| Oil gutter bolt | 10 | 1.0 | 7.5 |
| Final gear bolt | 90 | 9.0 | 65.0 |
NOTE:
The specified tightening torque is also described in the following.
GEAR SHIFT CONTROL LEVER AND CABLE COMPONENTS
MANUAL TRANSAXLE UNIT COMPONENTS
GEAR SHIFT AND SELECT SHAFT ASSEMBLY COMPONENTS
MANUAL TRANSAXLE ASSEMBLY COMPONENTS
GEAR SHIFT SHAFT COMPONENTS
DIFFERENTIAL COMPONENTS
GEAR SHIFT CONTROL LEVER AND CABLE COMPONENTS
MANUAL TRANSAXLE UNIT COMPONENTS
GEAR SHIFT AND SELECT SHAFT ASSEMBLY COMPONENTS
MANUAL TRANSAXLE ASSEMBLY COMPONENTS
GEAR SHIFT SHAFT COMPONENTS
DIFFERENTIAL COMPONENTS
Reference:
For the tightening torque of fastener not specified in this article, refer to FASTENERS INFORMATION .