Steering Angle Check

When tie-rod or tie-rod end was replaced, adjust toe and then also measure steering angle with turning radius gauge. If measured value is out of specified value, check following items for damage, deformation and crack.

• Steering gear case assembly
• Strut and component
• Suspension control arm and bush
• Suspension frame
• Wheel hub, steering knuckle or wheel bearing

Steering angle 

Sedan model (15 inch wheel) and hatchback model 

Inside: 36° ± 2° 

Outside: 32°6' (Reference) 

Sedan model (17 inch wheel) 

Inside: 35°42' ± 2° 

Outside: 31°54' (Reference)