Side-Air Bag (Inflator) Module Removal and Installation: Installation

Reference: SIDE-AIR BAG (INFLATOR) INSPECTION 

1. Install new fastener (1) to seat back.
   Fig 1: Identifying Seat Back Fastener

   Courtesy of SUZUKI OF AMERICA CORP.
2. Install new sleeve (1) and sleeve lock nut (2) to side-air bag (inflator) module, then tighten nut to specified torque.

   Tightening torque 

   Sleeve lock nut (a): 2.5 N.m (0.25 kg-m, 2.0 lbf-ft) 

   Fig 2: Identifying Sleeve And Sleeve Lock Nut

   Courtesy of SUZUKI OF AMERICA CORP.
3. Connect side-air bag (inflator) module connector (1) securely as shown in the figure.
   1. Connect connector.
   2. Lock connector with lock button (2).
      Fig 3: Connecting Side-Air Bag (Inflator) Module Connector

      Courtesy of SUZUKI OF AMERICA CORP.
4. Insert claw (1) of side-air bag (inflator) module on installation hole (2).
5. Install side-air bag (inflator) module by pushing it into fastener (3) securely.
   Fig 4: Identifying Claw Of Side-Air Bag (Inflator) Module

   Courtesy of SUZUKI OF AMERICA CORP.
6. Roll down backside seat back surface and fix seat back surface fastener securely.