Transfer Right Case and Left Case Disassembly and Reassembly: Reassembly

WARNING: This page is about a different variant/trim than selected.

When installing oil seal No. 2 (1) and No. 3 (2) to right case (3) using special tool, use care so that oil seals in proper direction and position as shown in figure.
Apply grease to oil seal lip.

Special Tool

(A): 09925-15410

"A": Grease 99000-25010SUZUKI Super Grease A

Oil seals installing depth

"a": 23.5 - 24.0 mm (0.925 - 0.945 in.)

"b": 38.0 - 39.0 mm (1.496 - 1.535 in.)

Fig 1: Identifying Oil Seal And Right Case
Courtesy of SUZUKI OF AMERICA CORP.
Install oil plate to right case.
Tightening torque

Oil plate bolt: 9 N.m (0.9 kg-m, 6.5 lb-ft)
When installing new oil seal No. 1 (1) and No. 2 (2) to left case (3) using special tool, use care so that oil seals in proper direction as shown in figure.
Apply grease to oil seal lip.

Special Tool

(A): 09913-85210 (For oil seal No. 1)

(A): 09944-88210 (For oil seal No. 2)

"A": Grease 99000-25010SUZUKI Super Grease A

Fig 2: Identifying Oil Seal And Left Case
Courtesy of SUZUKI OF AMERICA CORP.