LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2009 >> SX4 Crossover, FWD, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> Repair Instructions >> Output Shaft Speed Sensor Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Output Shaft Speed Sensor Removal and Installation: Removal

  1. Disconnect negative cable at battery.
  2. Disconnect output shaft speed sensor connector (2).
  3. Remove output shaft speed sensor (1) by removing its bolt.
    Fig 1: Identifying Output Shaft Speed Sensor Connector
    G04847777Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals