Tightening Torque Specifications
CAUTION:
For fastener with * (asterisk) below, be sure to tighten it according to specified procedure in "Repair Instructions".
TIGHTENING TORQUE SPECIFICATION
| Fastening part | Tightening torque | ||
|---|---|---|---|
| N.m | kgf-m | lbf-ft | |
| Tensioner bolt | 25 | 2.5 | 18.5 |
| Idler pulley bolt | 55 | 5.6 | 40.5 |
| Timing chain cover bolt * | 20 N.m → 60 N.m (2.0 kgf-m → 6.1 kgf-m, 15.0 lbf-ft → 44.5 lbf-ft) | ||
| Generator bracket bolt* | 55 | 5.6 | 40.5 |
| Generator bolt* | 55 | 5.6 | 40.5 |
| "B" terminal nut | 11 | 1.1 | 8.5 |
| Generator bolt | 55 | 5.6 | 40.5 |
| "B" terminal wire nut | 11 | 1.1 | 8.5 |
NOTE:
The specified tightening torque is also described in the following.
GENERATOR COMPONENTS
GENERATOR COMPONENTS
Reference:
For the tightening torque of fastener not specified in this information, refer to FASTENER INFORMATION .