Rear Suspension frame/Bushing Disassembly and Assembly: Disassembly

Cut rubber (1) of flange of rear suspension frame bushing.
Using grinder (2), grind off flange (3) of upper arm bushing.
CAUTION: Be careful not to damage rear suspension frame bushing (4) when grinding flange (3) of upper arm bushing with grinder.

Fig 1: Grinding Upper Arm Bushing Using Grinder
Courtesy of SUZUKI OF AMERICA CORP.
Push out rear suspension frame bushing by using hydraulic press (1) and special tool.
Special Tool

(A): 09913-75520

Fig 2: Pushing Rear Suspension Frame
Courtesy of SUZUKI OF AMERICA CORP.