P/S Pump Removal and Installation: Installation

Reverse removal procedure, and then noting the following instructions.

NOTE:

Adjust accessory drive (P/S) belt referring to ACCESSORY DRIVE BELT REMOVAL AND INSTALLATION .
Fill specified power steering fluid after installation and bleed air without failure. (Refer to P/S SYSTEM AIR BLEEDING PROCEDURE .)

Tightening torque

P/S pump mounting bolt: 25 N.m (2.5 kg-m, 18.5 lbf-ft)

P/S pump high pressure pipe union bolt: 60 N.m (6.1 kg-m, 44.5 lbf-ft)