HVAC Unit Removal and Installation: Installation

Install HVAC unit by reversing removal procedure, noting the following items.
- When installing each part, be careful not to catch any wiring harness.
- Replenish specified amount of compressor oil to compressor suction side referring to PRECAUTIONS ON REPLENISHING COMPRESSOR OIL .
- Install padding (1) to installation hole uniformly.
  
  Fig 1: Identifying Padding
  Courtesy of SUZUKI OF AMERICA CORP.
- Fill engine coolant to radiator.
- Enable air bag system referring to ENABLING AIR BAG SYSTEM or ENABLING AIR BAG SYSTEM .
- Evacuate and charge system. Refer to OPERATION PROCEDURE FOR CHARGING A/C WITH REFRIGERANT .