LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2009 >> Grand Vitara Base, Standard >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Air Conditioning System >> Precautions >> Precautions on Servicing A/C System >> Handling A/C cycle part and tooling
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Handling A/C cycle part and tooling

CAUTION:
  • When connecting hoses and pipes, apply a few drops of compressor oil (refrigerant oil) to O-ring.
  • Replace O-ring with new one once hoses, pipes and parts disconnected.
  • Route drain hose so that drained water does not make any contact to vehicle components.
  • If pipes or hoses are replaced, replenish specified amount of compressor oil to compressor suction side referring to "REPLENISHING COMPRESSOR OIL " in "Operation Procedure for Refrigerant Charge".
  • When handling recovery and recycling equipment, be sure to follow the instruction manual for the equipment.
NOTE:
  • Check local governmental regulations regarding working with refrigerator systems and its tooling.
scientia non olet · About LEMON Manuals