Main Fuel Level Gauge Removal and Installation: Notes

WARNING: This page is about a different variant/trim than selected.

WARNING: When performing the following procedure, be sure to observe PRECAUTIONS ON FUEL SYSTEM SERVICE in order to reduce the risk or fire and personal injury.

CAUTION:

Do not touch resister plate (1) and deform arm (2). It may cause main fuel level gauge to fail.
Be very careful not to cause damage to fuel tube installed section (sealed section in bore). If it be damaged, replace it with new one, or fuel will leak from the part.

Fig 1: Identifying Resister Plate And Deform Arm
Courtesy of SUZUKI OF AMERICA CORP.