TP Sensor Rationality Monitor
WARNING: This page is about a different variant/trim than selected.
OPERATION
| DTC(s) | P2119, P2176 |
| Monitor execution | P2119 Monitor 1: Once per ignition on Monitor 2: Once per ignition on P2176: Once per ignition on |
| Monitoring Duration | P2119 Monitor 1: 0.2 sec. Monitor 2: 0.5 sec. P2716: 1 sec. |
ENABLE CONDITIONS
| Parameter | Min. | Max. |
|---|---|---|
| Vehicle speed | = 0 km/h (0 mile/h) | |
| Engine speed | - | 40 RPM |
| ECT | 5 °C (41.5 °F) | 100 °C (213 °F) |
| IAT | 5 °C (41.5 °F) | - |
| Battery voltage | 10 V | - |
| Accelerator pedal position | - | 14.9% |
TYPICAL MALFUNCTION THRESHOLDS
| P2119: |
| Monitor 1: |
| Throttle position < 10% or > 40% |
| Monitor 2: |
| Throttle blade return response > 0.56 sec. |
| P2176: |
| Range check potentiometer 1 voltage < 4.12 V or > 4.55 V (Range check potentiometer 1 value at lower stop) or Range check potentiometer 2 voltage < 0.34 V or > 0.99 V (Range check potentiometer 2 value at lower stop) |