DTC Troubleshooting
WARNING: This page is about a different variant/trim than selected.
DTC TROUBLESHOOTING CHART
| Step | Action | YES | NO |
|---|---|---|---|
| 1 | DTC recheck
Is DTC P0607 or P2610 still detected? |
Go to Step 2. | Check for intermittent trouble. |
| 2 | ECM reprogramming check Was reprogramming of ECM executed? |
Execute reprogramming of ECM correctly once again. | Go to Step 3. |
| 3 | ECM power and ground circuit check
Are they in good condition? |
Go to Step 4. | Repair or replace defective wire harness. |
| 4 | Troubleshooting of other DTC(s) detected at the same time Is other DTC(s) detected together? |
Go to troubleshooting for applicable DTC. | Substitute a known-good ECM and recheck. |