Enable conditions
WARNING: This page is about a different variant/trim than selected.
TRANSMISSION FLUID TEMPERATURE SENSOR ENABLE CONDITIONS
| Parameter | Minimum | Maximum |
|---|---|---|
| P0712 | ||
| Battery voltage | 10.5 V | |
| Engine speed | 400 rpm | |
| CAN communication (U0073), (U0100) | Normal condition or not monitored | |
| P0713 | ||
| Battery voltage | 10.5 V | |
| Engine speed | 400 rpm | After engine start: 60 seconds |
| Output shaft speed/accumulation time | 600 rpm/15 minutes | |
| Engine coolant temperature | 50°C (122°F) | |
| Shift position | "R", "D", "3", or "L" range | |
| Transmission range sensor | Normal condition or not monitored | |
| Output shaft speed sensor | Normal condition or not monitored | |
| CAN communication (U0073), (U0100) | Normal condition or not monitored | |