LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2009 >> Grand Vitara Base, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Automatic Transmission - 5AT) >> Diagnostic Information and Procedures >> DTC Clearance
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Clearance

WARNING: This page is about a different variant/trim than selected.
NOTE: DTC and freeze frame data stored in TCM memory are also cleared in following cases. Be careful not to clear them before keeping their record.
  • When power to TCM is cut off (by disconnecting battery cable, removing fuse or disconnecting TCM connector).
  • When the same malfunction (DTC) is not detected again during 40 engine warm-up cycles.
  1. Turn ignition switch OFF.
  2. Connect SUZUKI scan tool to data link connector (DLC) (1).

    Special Tool 

    (A): SUZUKI scan tool (SUZUKI-SDT) 

    Fig 1: Connecting Suzuki Scan Tool To Data Link Connector (DLC)
    G06500050Courtesy of SUZUKI OF AMERICA CORP.
  3. Clear DTC according to instructions displayed on SUZUKI scan tool. Refer to SUZUKI scan tool operators manual for further details.
  4. After completing the check, turn ignition switch OFF and disconnect SUZUKI scan tool from data link connector (DLC).
scientia non olet · About LEMON Manuals