Tightening Torque Specifications
CAUTION:
For fastener with * (asterisk) below, be sure to tighten it according to specified procedure in "Repair Instructions".
TIGHTENING TORQUE SPECIFICATION
| Fastening part | Tightening torque | ||
|---|---|---|---|
| N.m | kgf-m | lbf-ft | |
| Windshield wiper bolt | Tighten 8.5 N.m (0.85 kgf-m, 6.5 lbf-ft) by specified procedure | ||
| Windshield wiper arm nut | 17 | 1.7 | 12.5 |
| Rear wiper motor mounting bolt | 7 | 0.7 | 5.0 |
| Rear wiper arm nut | 8 | 0.8 | 6.0 |
NOTE:
The specified tightening torque is also described in the following.
Wipers and Washers Components
Wipers and Washers Components
Reference:
For the tightening torque of fastener not specified in this section, refer to FASTENER INFORMATION .