Key Interlock Cable Removal and Installation: Removal

Disconnect negative (-) cable from battery.
Disable air bag system. Refer to DISABLING AIR BAG SYSTEM or DISABLING AIR BAG SYSTEM .
Remove steering column hole cover.
Tilt steering column.
Remove steering column cover.
Turn ignition switch to ACC position.
Pull out key interlock cable (1) from key cylinder cover (2) while pressing checkhook with slotted flat end rod or the like.

Fig 1: Identifying Key Interlock Cable And Key Cylinder Cover
Courtesy of SUZUKI OF AMERICA CORP.
Turn ignition switch to LOCK position.
Remove front console box.
Detach cable end (1) from interlock cam (2) while pressing claws (3) of interlock cam boss.
At this time, be careful not to cause damage to its claws.

Detach cable casing cap (4) from selector bracket (5) while pressing checkhook.
Remove interlock cable.

Fig 2: Detaching Cable Casing Cap From Selector Bracket
Courtesy of SUZUKI OF AMERICA CORP.