Tightening Torque Specifications
WARNING: This page is about a different variant/trim than selected.
CAUTION:
For fastener with * (asterisk) below, be sure to tighten it according to specified procedure in "Repair Instructions".
TIGHTENING TORQUE SPECIFICATIONS
| Fastening part | Tightening torque | ||
|---|---|---|---|
| N.m | kgf-m | lbf-ft | |
| Oil pressure switch | 13 | 1.3 | 9.5 |
| Engine oil drain plug | 35 | 3.6 | 26.0 |
| Oil filter | 30 | 3.1 | 22.5 |
| Oil pump strainer bolt | 10 | 1.0 | 7.5 |
| Baffle plate bolt | 10 | 1.0 | 7.5 |
| Upper oil pan bolt No. 1* | 25 | 2.5 | 18.5 |
| Upper oil pan bolt No. 2* | 10 | 1.0 | 7.5 |
| Upper oil pan bolt No. 3* | 10 | 1.0 | 7.5 |
| Lower oil pan bolt* | 10 | 1.0 | 7.5 |
| Oil pump bolt | 23 | 2.3 | 17.0 |
NOTE:
The specified tightening torque is described in the following.
OIL PAN AND OIL PUMP STRAINER COMPONENTS
OIL PAN AND OIL PUMP STRAINER COMPONENTS
Reference:
For the tightening torque of fastener not specified in this information, refer to FASTENER INFORMATION .