LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2009 >> Grand Vitara Base, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Engine Lubrication System (N32A)) >> Repair Instructions >> Oil Pump Removal and Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Oil Pump Removal and Installation: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install oil pump (1).

    Tightening torque 

    Oil pump bolt (a): 23 N.m (2.3 kg-m, 17.0 lbf-ft) 

    Fig 1: Identifying Oil Pump Bolts
    G06493307Courtesy of SUZUKI OF AMERICA CORP.
  2. Install 1st timing chain. See 1ST TIMING CHAIN AND TIMING CHAIN TENSIONER ADJUSTER NO. 2 REMOVAL AND INSTALLATION .
  3. Install timing chain cover. See TIMING CHAIN COVER REMOVAL AND INSTALLATION .
  4. Install generator bracket. See GENERATOR REMOVAL AND INSTALLATION .
  5. Install OCV. OCV REMOVAL AND INSTALLATION .
  6. Install P/S pump bracket. See P/S HOSE/PIPE COMPONENTS .
  7. Install cylinder head cover. See CYLINDER HEAD COVER REMOVAL AND INSTALLATION .
  8. Install accessory drive belt. See ACCESSORY DRIVE BELT REMOVAL AND INSTALLATION .
  9. Install engine assembly from vehicle. See ENGINE ASSEMBLY REMOVAL AND INSTALLATION .
scientia non olet · About LEMON Manuals