Enable conditions
WARNING: This page is about a different variant/trim than selected.
INPUT SHAFT SPEED SENSOR ENABLE CONDITIONS
| Parameter | Minimum | Maximum |
|---|---|---|
| Battery voltage | 10.5 V | |
| Engine speed | 400 rpm | |
| Output shaft speed | 600 rpm | |
| Shift position | "D", "3", or "L" range | |
| Transmission range sensor | Normal condition or not monitored | |
| Output shaft speed sensor | Normal condition or not monitored | |
| CAN communication (U0073), (U0100) | Normal condition or not monitored | |