Enable conditions
WARNING: This page is about a different variant/trim than selected.
1-2 SHIFT ENABLE CONDITIONS
| Parameter | Minimum | Maximum |
|---|---|---|
| Battery voltage | 10.5 V | |
| Engine speed | 400 rpm | |
| Absolute pedal position | ||
| Transmission fluid temperature | 20°C (50°F) | |
| 4L/N switch | OFF | |
| Output gear position | 2nd and 4th, 2nd and 5th | |
| Shift position | "D" | |
| Output shaft speed sensor | Normal condition or not monitored | |
| Input shaft speed sensor | Normal condition or not monitored | |
| Shift solenoid A, B and C | Normal condition or not monitored | |
| Pressure control solenoid B and C | Normal condition or not monitored | |
| CAN communication (U0073), (U0100) | Normal condition or not monitored | |