DTC Table
DTC CHART
| DTC (Flashing pattern of key indicator light) | Detected parts item | Detecting condition |
|---|---|---|
| 11 | Communication Error With Steering Lock Unit | No communication is available between keyless start control module and steering lock unit |
| 12 | - | Normal (No malfunction DTC is detected) |
| 13 | Release Signal Error from Steering Lock Unit | Although lock release signal is output to steering lock unit, no lock release signal is inputted from steering lock unit |
| 14 | Steering Lock Unit Malfunction | Although lock release signal is output to steering lock unit, steering lock is not released due to temperature rise of steering lock unit solenoid and no lock release signal is inputted |
| 21 | Internal Error in Keyless Start Control Module (EEPROM Reading Error) | Data cannot be read from memory in keyless start control module |
| 22 | Internal Error in Keyless Start Control Module (EEPROM Writing Error) | Data cannot be written into memory in keyless start control module |
| 31 | Lost Communication With BCM | Keyless start control module cannot receive data sent by CAN from BCM |
| 33 | Control Module Communication Bus Off | No communication is available with all control modules connected by CAN |
| 51 | Driver Side Door Request Switch Malfunction | Input signal from driver side door request switch remains ON, unchanged for 10 minutes or longer |
| 52 | Passenger Side Door Request Switch Malfunction | Input signal from passenger side door request switch remains ON, unchanged for 10 minutes or longer |
| 53 | Rear end Door Request Switch Malfunction | Input signal from rear end door request switch remains ON, unchanged for 10 minutes or longer |