Fuel Line Coupler: Service and Repair

Fuel Hose Disconnecting and Reconnecting

WARNING: When performing the following procedure, be sure to observe Precautions on Fuel System Service in order to reduce the risk of fire and personal injury.

For Connection Other Than Quick Joint

Clamp around fuel tank

NOTE: Be sure to install hose in the spool part of pipe surely.






Clamp other than around fuel tank






For Quick Joint (Fuel Vapor Line)

Disconnecting

1. Remove mud, dust and/or foreign material between pipe (1) and quick joint (2) by blowing compressed air.
2. Disconnect quick joint while joint lock is unlocked by pushing both sides of joint (3).






Reconnecting

Insert quick joint to pipe until they lock securely, and confirm that quick joint is not disconnected by hand.

For Quick Joint (Fuel Feed Line)

Disconnecting

1. Remove mud, dust and/or foreign material between pipe (1) and quick joint (2) by blowing compressed air.
2. Disconnect quick joint while joint lock is unlocked by pushing both sides of lock button (3).






Reconnecting

Insert quick joint to pipe until they lock securely, and confirm that quick joint is not disconnected by hand.

For Quick Joint (Fuel Suction Hose)

Disconnecting

1. Remove mud, dust and/or foreign material between pipe (1) and quick joint (2) by blowing compressed air.
2. Unlock joint lock by inserting special tool between pipe and quick joint.

Special Tool
(A): 09919-47020

3. Disconnect quick joint from pipe.






Reconnecting

Insert quick joint to fuel pipe until they lock securely, and confirm that quick joint is not disconnected by hand.