Blower Motor Resistor: Service and Repair

Blower Motor Controller Removal and Installation

Removal
1. Disconnect negative (-) cable at battery.
2. Disable air bag system referring to Disabling Air Bag System: Advanced Air Bag or Disabling Air Bag System: Except Advanced Air Bag.
3. Remove glove box.
4. Remove passenger side instrument panel under cover.
5. Disconnect blower motor controller coupler (3).
6. Remove blower motor controller (1) by loosening its fastening screws (2).






Installation
1. Reverse removal procedure.
2. Enable air bag system referring to Enabling Air Bag System: Advanced Air Bag or Enabling Air Bag System: Except Advanced Air Bag.