Crankshaft Main Bearing

Main bearing clearance
Standard: 0.032 - 0.083 mm (0.0013 - 0.0033 in.)
Limit: 0.083 mm (0.0033 in.)





Main bearing cap bolt No.1* 20 Nm -> +80° (2.0 kgf-m -> +80° , 15.0 lbf-ft -> +80°)
Main bearing cap bolt No.2* 15 Nm -> +110° (1.5 kgf-m -> +110° , 11.0 lbf-ft -> +110°)
Main bearing cap side bolt No.1* 30 Nm -> +60° (3.1 kgf-m -> +60° , 22.5 lbf-ft -> +60°)
Main bearing cap side bolt No.2* 30 Nm -> +60° (3.1 kgf-m -> +60° , 22.5 lbf-ft -> +60°)

For fastener with * (asterisk) below, be sure to tighten it according to specified procedure in "Repair Instructions".