Transfer Relay
- Turn ignition switch "OFF". (Stay for at least 5 seconds.)
- Remove transfer shift high relay and transfer shift low relay 2. Refer to [4WD SYSTEM: COMPONENT PARTS LOCATION ].
- Apply 12V direct current between transfer shift high and low relay terminals 1 and 2.
- Check continuity between relay terminals 3 and 4, and 3 and 5.
Courtesy of SUZUKI OF AMERICA CORP.
TERMINAL CONTINUITY CHARTTerminal Condition Continuity 3 - 4 12V direct current supply between terminals 1 and 2 No OFF Yes 3 - 5 12V direct current supply between terminals 1 and 2 Yes OFF No - If the inspection results are abnormal replace the transfer shift high or low relay.