LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2009 >> Equator RMZ-4 >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (VQ40DE) - (5 Of 5) >> ASCD Brake Switch Circuit Check >> Component Inspection >> ASCD Clutch Switch
April 5, 2026: LEMON Manuals is launched! Read the announcement.

ASCD Clutch Switch

  1. Turn ignition switch OFF.
  2. Disconnect ASCD clutch switch harness connector.
  3. Check harness continuity between ASCD clutch switch terminals 1 and 2 under the following conditions.
    Fig 1: Checking Harness Continuity Between ASCD Clutch Switch Terminals 1 And 2
    G06441665Courtesy of SUZUKI OF AMERICA CORP.
    CONTINUITY SPECIFICATION

    Condition Continuity
    Clutch pedal: Fully released Should exist
    Clutch pedal: Slightly depressed Should not exist

    If NG, adjust ASCD clutch switch installation, refer to [CLUTCH PEDAL: ON-VEHICLE INSPECTION AND ADJUSTMENT ], and perform step  3 again.

scientia non olet · About LEMON Manuals