Diagnosis Procedure

DIAGNOSIS PROCEDURE

Step	Action	YES	NO
1	CHECK ELECTRIC THROTTLE CONTROL ACTUATOR VISUALLY Turn ignition switch OFF. Remove the intake air duct. Check if foreign matter is caught between the throttle valve and the housing. Courtesy of SUZUKI OF AMERICA CORP. OK or NG	GO TO 2.	Remove the foreign matter and clean the electric throttle control actuator inside.
2	REPLACE ELECTRIC THROTTLE CONTROL ACTUATOR Replace the electric throttle control actuator. Perform "Throttle Valve Closed Position Learning" in [PROCEDURE AFTER REPLACING ECM ]. Perform "Idle Air Volume Learning" in [PROCEDURE AFTER REPLACING ECM ].	INSPECTION END