| 1 |
CHECK POWER SUPPLY CIRCUIT
- Turn ignition switch ON.
 Courtesy of SUZUKI OF AMERICA CORP.
- 2. Check voltage between power window and door lock/unlock switch RH connector and ground.
Is the measurement value within the specification? |
GO TO 3 |
GO TO 2 |
| 2 |
CHECK HARNESS CONTINUITY
- Turn ignition switch OFF.
   Courtesy of SUZUKI OF AMERICA CORP.SUZUKI OF AMERICA CORP.SUZUKI OF AMERICA CORP.
- 2. Disconnect BCM and power window and door lock/unlock switch RH.
- 3. Check continuity between BCM connector (A) and power window and door lock/unlock switch RH connector (B).
Courtesy of SUZUKI OF AMERICA CORP.SUZUKI OF AMERICA CORP.SUZUKI OF AMERICA CORP.
- 4. Check continuity between BCM connector (A) and ground.
Courtesy of SUZUKI OF AMERICA CORP.SUZUKI OF AMERICA CORP.SUZUKI OF AMERICA CORP.
Is the inspection result normal? |
GO TO 4 |
Repair or replace harness. |
| 3 |
CHECK GROUND CIRCUIT
- Turn ignition switch OFF.
 Courtesy of SUZUKI OF AMERICA CORP.
- 2. Disconnect power window and door lock/unlock switch RH.
- 3. Check continuity between power window and door lock/unlock switch RH connector and ground.
Is the inspection result normal? |
Replace power window and door lock/unlock switch RH. Refer to
[FRONT POWER WINDOW SWITCH: REMOVAL AND INSTALLATION ]. |
Repair or replace harness. |
| 4 |
CHECK BCM OUTPUT SIGNAL
- Connect BCM.
  Courtesy of SUZUKI OF AMERICA CORP.SUZUKI OF AMERICA CORP.
- 2. Turn ignition switch ON.
- 3. Check voltage between BCM connector and ground.
Courtesy of SUZUKI OF AMERICA CORP.SUZUKI OF AMERICA CORP.
Is the measurement value within the specification? |
Replace power window and door lock/unlock switch RH. Refer to
[FRONT POWER WINDOW SWITCH: REMOVAL AND INSTALLATION ]. |
Replace BCM. Refer to
[BCM (BODY CONTROL MODULE): REMOVAL AND INSTALLATION
] |