SDT Diagnostic Modes
SDT can display each diagnostic item using the diagnostic test modes shown following.
DIAGNOSTIC MODES DESCRIPTION
| Diagnostic mode | Description |
|---|---|
| Utility | Supports inspections and adjustments. Commands are transmitted to the BCM for setting the status suitable for required operation, input/output signals are received from the BCM and received data is displayed. |
| Data list | Displays BCM input/output data in real time. |
| Active test | Operation of electrical loads can be checked by sending drive signal to them. |
| DTC check | Displays BCM DTC check results. |
| Bus check | The result of transmit/receive diagnosis of CAN communication can be read. |
| C/U Part Number | BCM part number can be read. |
| Configuration | Performs BCM configuration read/write functions. |