On Board Diagnosis Logic
WARNING: This page is about a different variant/trim than selected.
DTC DETECTING CONDITION AND POSSIBLE CAUSE
| DTC No. |
Trouble diagnosis name |
DTC detecting condition |
Possible cause |
P0335
0335 |
Crankshaft position sensor (POS) circuit |
- The crankshaft position sensor (POS) signal is not detected by the ECM during the first few seconds of engine cranking.
- The proper pulse signal from the crankshaft position sensor (POS) is not sent to ECM while the engine is running.
- The crankshaft position sensor (POS) signal is not in the normal pattern during engine running.
|
- Harness or connectors (The sensor circuit is open or shorted)
- Crankshaft position sensor (POS)
- Signal plate
|