LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2009 >> Equator Premium >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Engine Control System (VQ40DE) - (3 Of 5)) >> DTC P2a00, P2a03: A/F Sensor 1 >> DTC Confirmation Procedure >> With SDT
April 5, 2026: LEMON Manuals is launched! Read the announcement.

With SDT

WARNING: This page is about a different variant/trim than selected.
  1. Start engine and warm it up to normal operating temperature.
  2. Turn ignition switch OFF and wait at least 10 seconds.
  3. Turn ignition switch ON.
  4. Turn ignition switch OFF and wait at least 10 seconds.
  5. Turn ignition switch ON and select "SELF-LEARNING CONT" in "Utility" mode with SDT.
  6. Clear the self-learning coefficient by touching "Clear".
  7. Turn ignition switch OFF and wait at least 10 seconds.
  8. Turn ignition switch ON.
  9. Turn ignition switch OFF and wait at least 10 seconds.
  10. Start engine and keep the engine speed between 3, 500 and 4, 000 RPM for 1 minute under no load.
  11. Let engine idle for 1 minute.
  12. Keep engine speed between 2, 500 and 3, 000 RPM for 20 minutes.
  13. Check 1st trip DTC.
  14. If 1st trip DTC is detected, go to [P2A00, P2A03 A/F SENSOR 1 ].
scientia non olet · About LEMON Manuals