Inspection Procedure

Turn ignition switch OFF.
Connect GST to data link connector, which is located under LH dash panel near the fuse box cover.

Fig 1: Identifying Brake Pedal And Data Link Connector
Courtesy of SUZUKI OF AMERICA CORP.
Turn ignition switch ON.
Enter the program according to instruction on the screen or in the operation manual.

Fig 2: GST Screen Display - Press Enter
Courtesy of SUZUKI OF AMERICA CORP.

(*: Regarding GST screens in this section, sample screens are shown.)
Perform each diagnostic service according to each service procedure.

Fig 3: GST Screen Display - Readiness Tests
Courtesy of SUZUKI OF AMERICA CORP.

For further information, see the GST Operation Manual of the tool maker.