LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2009 >> Equator Premium >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Data Communication System >> Diagnostic Information and Procedure >> DIFF Branch Line Circuit Check
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DIFF Branch Line Circuit Check

DIAGNOSIS PROCEDURE

Step Action YES NO
1  CHECK CONNECTOR 
  1. Turn the ignition switch OFF.
  2. Disconnect the battery cable from the negative terminal.
  3. Check the terminals and connectors of the differential lock control unit for damage, bend and loose connection (unit side and connector side).

Is the inspection result normal? 		 GO TO 2. Repair the terminal and connector.
2  CHECK HARNESS FOR OPEN CIRCUIT 
  1. Disconnect the connector of differential lock control unit.
  2. Check the resistance between the differential lock control unit harness connector terminals.
G06446885Courtesy of SUZUKI OF AMERICA CORP.

Is the measurement value within the specification? 		 GO TO 3. Repair the differential lock control unit branch line.
3  CHECK POWER SUPPLY AND GROUND CIRCUIT 
Check the power supply and the ground circuit of the differential lock control unit. Refer to [P1833 INITIAL START ]
Is the inspection result normal? 		 Replace the differential lock control unit. Refer to [DIFFERENTIAL LOCK CONTROL UNIT: REMOVAL AND INSTALLATION ] Error was detected in the differential lock control unit branch line.
scientia non olet · About LEMON Manuals