With SDT
- Turn ignition switch "ON". (Do not start engine.)
- Select "Data list" mode for "Engine / Powertrain" with SDT.
- Start engine and maintain the following conditions for at least 10 minutes (Total). (It is not necessary to maintain continuously.)
VHCL/S SE-AT: 10 km/h (6 MPH) or more
ACCELE POSI: More than 1.0/8
SLCT LVR POSI: "D" position
- If DTC is detected, go to [DTC P1710 A/T FLUID TEMPERATURE SENSOR CIRCUIT ].