SDT Function (Airbag)

SDT can display each diagnostic item using the diagnostic test modes shown following.

SDT FUNCTION CHART (AIRBAG)

AIR BAG diagnostic mode	Description
DTC check	A current Self-diagnosis result (also indicated by the number of warning lamp flashes in the Diagnosis mode) is displayed on the SDT screen in real time. This refers to a malfunctioning part requiring repairs.
	Diagnosis results previously stored in the memory are displayed on the SDT screen. The stored results will remain until memory erasing is executed.
	With TROUBLE DIAG RECORD, diagnosis results previously erased by a reset operation can be displayed on the SDT screen.
C/U Identification Number	The air bag diagnosis sensor unit for each vehicle model is assigned with its own, individual classification number. This number will be displayed on the SDT screen, as shown. When replacing the air bag diagnosis sensor unit, refer to the part number for the compatibility. After installation, replacement with a correct unit can be checked by confirming this classification number on the SDT screen. The air bag diagnosis sensor unit discriminated numbers assigned are as follows: (VQ models) F69F (for models with side air bags) F67E (for models without side air bags) (QR models) F6A0 (for models with side air bags) F67F (for models without side air bags)
Passenger Air bag	The STATUS (readiness) of the front passenger air bag module is displayed. The STATUS displayed (ON/OFF) depends on the signals supplied to the occupant classification system control module and air bag diagnosis sensor unit. Refer to [OCCUPANT CLASSIFICATION SYSTEM (OCS) DESCRIPTION ] for more information.