LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2009 >> Equator Base, 4D Pickup >> Repair and Diagnosis >> Maintenance >> Procedures >> Maintenance And Lubrication >> Repair instructions >> Changing Engine Coolant [QR25DE] >> Flushing Cooling System
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Flushing Cooling System

  1. Drain the engine coolant from the engine cooling system. Refer to [CHANGING ENGINE COOLANT ].
  2. Fill the radiator and the reservoir tank (to the "MAX" line) with water. Reinstall the radiator cap and leave the vented reservoir cap off.
  3. Run the engine until it reaches normal operating temperature.
  4. Press the engine accelerator two or three times under no-load.
  5. Stop the engine and wait until it cools down.
  6. Drain the water from the engine cooling system. Refer to [CHANGING ENGINE COOLANT ].
  7. Repeat steps  2 through  6 until clear water begins to drain from the radiator.
scientia non olet · About LEMON Manuals