LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2009 >> Equator Base, 4D Pickup >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine General Information And Diagnosis (Qr25DE)) >> Diagnostic Information ad Procedures >> DTC P0850: PNP Switch >> Overall Function Check >> With GST
April 5, 2026: LEMON Manuals is launched! Read the announcement.

With GST

WARNING: This page is about a different variant/trim than selected.
  1. Turn ignition switch ON.
  2. Check voltage between ECM terminal 102 (PNP switch signal) and ground under the following conditions.
    Fig 1: Checking Voltage Between ECM Terminal 102 And Ground
    G06444261Courtesy of SUZUKI OF AMERICA CORP.
    VOLTAGE CONDITION CHART

    Condition (shift position) Voltage (Known-good data)
    P or N position (A/T)
    Neutral position (M/T)    		 Approx. 0 (V)
    Except the above position BATTERY VOLTAGE (11 - 14V)
  3. If NG, go to [P0850 PNP SWITCH ].
scientia non olet · About LEMON Manuals