LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2009 >> Equator Base, 4D Pickup >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Automatic Transmission) >> Repair Instructions >> Control Valve Body Cover Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise the vehicle. Refer to LIFTING AND JACKING THE VEHICLE .
  2. Remove the left front wheel and tire assembly. Refer to REMOVAL PROCEDURE .
  3. Remove the left and right splash shield. Refer to ENGINE SPLASH SHIELD REPLACEMENT - LEFT SIDE and ENGINE SPLASH SHIELD REPLACEMENT - RIGHT SIDE .
  4. Remove the front engine mount. Refer to REMOVAL PROCEDURE .
  5. Remove the transaxle oil cooler lines and seals from the transaxle. Refer to REMOVAL PROCEDURE .
    Fig 1: Identifying Control Valve Body Cover (1 Of 2)
    G04845957Courtesy of SUZUKI OF AMERICA CORP.
  6. Remove the 9 TORX bolts (2) from the control valve body cover (1).
    NOTE: Do not pry with a tool on the transaxle control valve body cover, case or sealing surfaces.
  7. Remove control valve body cover.
scientia non olet · About LEMON Manuals