LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2009 >> Equator Base, 4D Pickup >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (VQ40DE) - (2 Of 5) >> DTC P0507: ISC System >> Diagnosis Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Diagnosis Procedure

DIAGNOSIS PROCEDURE

Step Action YES NO
1  CHECK PCV HOSE CONNECTION 
Confirm that PCV hose is connected correctly.
OK or NG 		 GO TO 2. Repair or replace.
2  CHECK INTAKE AIR LEAK 
  1. Start engine and let it idle.
  2. Listen for an intake air leak after the mass air flow sensor.

OK or NG 		 GO TO 3. Discover air leak location and repair.
3  REPLACE ECM 
  1. Stop engine.
  2. Replace ECM.
  3. Perform initialization of immobilizer system and registration of all immobilizer system ignition key IDs. Refer to [ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT: SPECIAL REPAIR REQUIREMENT ]
  4. Perform "VIN Registration" in [PROCEDURE AFTER REPLACING ECM ].
  5. Perform "Accelerator Pedal Released Position Learning" in [PROCEDURE AFTER REPLACING ECM ].
  6. Perform "Throttle Valve Closed Position Learning" in [PROCEDURE AFTER REPLACING ECM ].
  7. Perform "Idle Air Volume Learning" in [PROCEDURE AFTER REPLACING ECM ].
 INSPECTION END   
scientia non olet · About LEMON Manuals