LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2009 >> Equator Base, 4D Pickup >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (VQ40DE) - (2 Of 5) >> DTC P0443: EVAP Canister Purge Volume Control Solenoid Valve >> DTC Confirmation Procedure >> With SDT
April 5, 2026: LEMON Manuals is launched! Read the announcement.

With SDT

  1. Start engine and warm it up to normal operating temperature.
  2. Turn ignition switch OFF and wait at least 10 seconds.
  3. Turn ignition switch ON.
  4. Turn ignition switch OFF and wait at least 10 seconds and then turn ON.
  5. Select "PURG VOL CN/V P1444" (for DTC P0443) of "EVAPORATIVE SYSTEM" in "DTC work support" mode with SDT.
  6. Touch "START".
  7. Start engine and let it idle until "TESTING" on SDT changes to "COMPLETED". (It will take approximately 10 seconds.)

    If "TESTING" is not displayed after 5 minutes, retry from step  2.

  8. Check that "OK" is displayed after touching "DTC check". If "NG" is displayed. Refer to [P0443 EVAP CANISTER PURGE VOLUME CONTROL SOLENOID VALVE ].
scientia non olet · About LEMON Manuals