Intake Manifold
- If stud bolts were removed from cylinder head, install them and tighten to the specified torque.
Intake manifold studs: 11.0 N.m (1.1kg-m, 8 ft-lb)
- Tighten all nuts and bolts to the specified torque in two or more steps in numerical order as shown.
Courtesy of SUZUKI OF AMERICA CORP.
Intake manifold bolt and nuts 1st step: 7.4 N.m (0.75 kg-m, 65 in-lb)
2nd step and after: 29.0 N.m (3.0 kg-m, 21 ft-lb)