LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2009 >> Equator Base, 4D Pickup Extra Cab >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Automatic Transmission/Transaxle) >> Diagnostic information and Procedures >> DTC U1000 CAN Communication Line >> Diagnosis Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Diagnosis Procedure

WARNING: This page is about a different variant/trim than selected.
DIAGNOSTIC PROCEDURE

Step Action YES NO
1  CHECK CAN COMMUNICATION CIRCUIT 
With SDT 
  1. Turn ignition switch "ON" and start engine.
  2. Select "DTC check" mode for "AT" with SDT.

Is any malfunction of the "CAN COMM CIRCUIT" indicated? 		 GO TO section 10H. Refer to [CAN SYSTEM SPECIFICATION CHART ] INSPECTION END 
scientia non olet · About LEMON Manuals