Clutch: Service and Repair

Clutch Piping: Removal and Installation
Carefully observe the following during clutch tube removal and installation.

CAUTION:
Do not spill brake fluid onto painted surfaces. If it spills, wipe up immediately and wash the affected area with water.

^ When installing the clutch hose to the bracket, align the clutch hose metal fittings with the bracket positioning emboss, then install the lock plate to secure.





CAUTION:
^ Do not damage the clutch hose.
^ Make sure the clutch hose is not bent or twisted.

^ Tighten the clutch tube and hose fittings to the specified torque.

CAUTION:
^ Do not reuse the copper washer.
^ Do not damage the clutch tube fittings or clutch tube.

^ After installation, bleed the air from the clutch hydraulic system.