Low-Pressure A/C Pipe

Low-Pressure A/C Pipe: Removal and Installation

REMOVAL

1. Discharge the refrigerant. Refer to [HFC-134a (R-134a) Service Procedure].
2. Remove the low-pressure A/C pipe.

CAUTION: Cap or wrap the joint of the pipe with suitable material such as vinyl tape to avoid the entry of air.

INSTALLATION
Installation is in the reverse order of removal. Refer to [Refrigeration System: Component].

CAUTION:
- Replace the O-ring of the low-pressure A/C pipe with a new one, then apply compressor oil to it for installation.
- After charging refrigerant, check for leaks.