Instrument Panel

INSTRUMENT PANEL







Removal

CAUTION: Before servicing, turn the ignition switch off, disconnect both battery terminals, then wait at least 3 minutes.

1. Disconnect the negative and positive battery negative terminals.
2. Remove the center console. Refer to [Instrument Panel Assembly: Removal and Installation].
3. Remove the combination meter. Refer to [Combination Meter: Removal and Installation].
4. Remove front pillar upper finisher. Refer to [Body Side Trim: Removal and Installation].
5. Remove audio unit. Refer to [Audio Unit: Removal and Installation].
6. Remove cluster lid D. Refer to [Instrument Panel Assembly: Removal and Installation].
7. Remove the passenger air bag module. Refer to [Front Passenger Air Bag Module: Removal and Installation].
8. Remove the instrument stay RH/LH bolts.
9. Remove instrument panel and pad assembly.
- Disconnect all remaining harnesses.

Installation

Installation is in the reverse order of removal.