P1715

P1715 Input Speed Sensor (Turbine Revolution Sensor)

Description
ECM receives turbine revolution sensor signal from TCM through CAN communication line.ECM uses this signal for engine control.

On Board Diagnosis Logic

NOTE:
- If DTC P1715 is displayed with DTC UXXXX, first perform the trouble diagnosis for DTC UXXXX. U Code Charts
- If DTC P1715 is displayed with DTC P0607 first perform the trouble diagnosis for DTC P0607. P0607
- If DTC P1715 is displayed with DTC P0335, first perform the trouble diagnosis for DTC P0335. P0335
- If DTC P1715 is displayed with DTC P0340, first perform the trouble diagnosis for DTC P0340. P0340
- If DTC P1715 is displayed with DTC P0605, first perform the trouble diagnosis for DTC P0605. P0605

The MIL will not light up for this self-diagnosis.

P1715:

Diagnosis Procedure

Step 1-2: