Output Gear Assembly Installation

Reference: TRANSMISSION CASE INSPECTION 

Reference: TRANSMISSION COOLER LINE SEALS INSTALLATION 

Reference: ROTATIONAL TORQUE MEASUREMENT 

Reference: FRONT DIFFERENTIAL BEARING RACE AND SELECTIVE SHIM INSTALLATION 

Reference: MANUAL SHIFT SHAFT SEAL AND BEARING INSTALLATION 

Reference: FRONT WHEEL DRIVE SHAFT OIL SEAL INSTALLATION 

Reference: FRONT DIFFERENTIAL CARRIER SEAL INSTALLATION 

Fig 1: Identifying Output Gear Assembly

Courtesy of SUZUKI OF AMERICA CORP.

1. Rotate the transmission case so that the I.D. tag is facing up.
2. Install the output gear assembly (12) into the transmission case assembly.
   Fig 2: Identifying Output Gear Retaining Ring And Output Gear Assembly

   Courtesy of SUZUKI OF AMERICA CORP.
3. Install the output gear retaining ring (48) into the output gear assembly (12) groove.

   Reference: LOW AND REVERSE CLUTCH PISTON INSTALLATION